To ensure correct generator charging of your battery , it is often necessary to adjust or install a new voltage regulator in the system. This article will deal with replacement using a new, working regulator. 1.Disconnect the battery’s negative cable and then the regulator wire marked BAT (battery) from [...] [...]
|
||||
|
Once you have removed the side valve cover you are ready to adjust the tappets. You will need a .016 feeler gauge (an angled tip works best) Have someone turn the engine over by hand with a socket on the flywheel nut. This is a 1 3/8″ nut. If you don’t have one,you’ll be stuck [...] [...] |
 |
|||
|
Copyright © 2012 Willys Jeep – Jeep Community Official Blog – Latest Jeep News - All Rights Reserved |
||||